Husqvarna PG 450 RentalConcrete floor grinder · Corona, CA
Rent the Husqvarna PG 450 planetary floor grinder from our Corona shop. It is the grinder we send out most: 17.7 inches wide, single-phase electric and small enough to fold into a truck bed. Every rental goes out with diamond tooling matched to your slab.
- Tooling included
- Same-day pickup
- Job-site delivery
- Daily · weekly · monthly
- Se habla español
Husqvarna PG lineupPG 450 specs
- Grinding width 17.7 in (450 mm)
- Discs 3 planetary discs
- Motor 3 hp, single-phase electric
- Weight About 240 lb
- Transport Folds and splits in two without tools
- Dust control Floating shroud, vacuum port
- Best for Garages, coating removal, light commercial
Specs from Husqvarna. Ask us which plug and circuit our rental unit needs before you book, so the outlet on your job is ready.
Rates depend on how long you need it. Call or text with your dates for a same-day quote. Weekdays 7:30 AM to 4:30 PM.
Call (909) 272-5137 →What the PG 450 is for
Coating prep
Open the slab and leave a clean profile for epoxy, polyaspartic, flake and metallic systems. This is the step that keeps a coating from peeling.
Coating and glue removal
Take off old paint, thin epoxy, sealers and adhesive residue before a new floor goes down.
Grinding and polishing
Flatten high spots and trowel marks, or step through the grits for a polished concrete finish.
Is it the right grinder?
- Good fit: one to three car garages, shops, retail bays and rooms where a bigger machine will not fit through the door.
- Edges: a walk-behind grinder cannot reach tight to the wall. Plan on a hand grinder with a shroud for edges and corners.
- Bigger floor? For warehouse-size slabs, ask about the Terrco grinder.
- Dust: dry grinding needs an extractor. Add the DE 120 SH vacuum to the same rental.
What goes out with it
- Diamond tooling matched to your slab hardness and the finish you want
- A walkthrough at the counter: setup and how to run it
- Phone support from a crew that installs floors for a living
- Coatings, primers and topcoats at the same counter, one trip
Rent it with
Husqvarna DE 120 SH
H-class floor vacuum built for silica dust. Runs on a standard 110–120 V circuit and hooks to any grinder we rent.
See the rental →Terrco Grinder
Production-grade grinder for bigger slabs, grinding and polishing at pace. Call for the model on the floor.
See the rental →Grinder + vac package
Husqvarna grinder and vacuum combos are available to buy. Buy the pair together and save. Call for pricing.
See packages →Renting takes three steps
Tell us the job
Call, text or send the rental request with your dates, square footage and slab condition.
We spec & reserve
We match the machine, tooling and dust control to your scope and hold it for your dates.
Pick up or delivered
Grab it at 284 Dupont St, Suite B #155 in Corona or have it dropped at the job site.
Questions, answered
How much does it cost to rent a Husqvarna PG 450?
Rates depend on how long you need it. We rent daily, weekly and monthly. Call or text (909) 272-5137 with your dates and square footage for a same-day quote.
Is diamond tooling included with the PG 450 rental?
Yes. Every grinder rental goes out with diamond tooling matched to your slab and finish. Tell us the slab condition and the coating you are putting down and we will set it up.
Do I need a vacuum with the PG 450?
For dry grinding, yes. An H-class extractor like the Husqvarna DE 120 SH keeps silica dust out of the air and keeps the site clean. You can rent both together.
Will the PG 450 fit in my truck?
Yes. The PG 450 folds and separates into two pieces without tools. It weighs about 240 lb, so plan on two people or a ramp to load it. We also deliver to job sites across Southern California.
Can I buy a PG 450 instead of renting?
Yes. We are a Husqvarna dealer and sell the PG 450 on its own or as a grinder and vacuum package. Call (909) 272-5137 for pricing.
PG 450 ready
when you are
Tell us the dates and the square footage. We will have the grinder, the tooling and the coating waiting.
← All equipment rentals