Contractor epoxy supply · Inland Empire & Orange County

Epoxy Supply Store
in Corona, CA

Kretus · Euclid Chemical · Multicoat · Husqvarna — on the shelf, not on backorder

Empire Coating Solutions is a working epoxy and concrete coating supply house in Corona. Contractors pick up 100% solids epoxy, polyaspartic topcoats, urethane cement, flake, metallic pigments, overlays and Husqvarna grinder tooling the same day, with pricing and advice from people who have been on the floor.

4 BrandsStocked locally
Same DayCounter pickup
ContractorPricing
2-DayTraining on site
What's on the shelf

Brands We Stock in Corona

Four lines cover the whole floor, from prep to topcoat. Everything below is stocked in our Corona warehouse or available to order through the online store.

Authorized distributor

Kretus

The core of our coatings shelf: Top Shelf Epoxy resins and hardeners, Select epoxy kits, Polyaspartic 72 / 85 / 92 topcoats, UPC urethane cement, colorants and metallic pigments.

  • Top Shelf Epoxy A & B
  • Select 3 gal kits
  • Polyaspartic 72 / 85 / 92
  • UPC urethane cement
  • Moisture vapor barrier primers
  • Colorants & metallic pigments
Read the Kretus guide
Concrete repair & protection

Euclid Chemical

Repair mortars, sealers, curing compounds and admixtures for getting a slab ready before any coating goes down.

  • Concrete repair mortars
  • Sealers & curing compounds
  • Admixtures
  • Joint & crack treatment
Shop Euclid
Overlays & decorative concrete

Multicoat

Cementitious overlays, stamp mixes and texture coats for patios, pool decks and stone and wood-plank looks, plus Hydrothane and polyurea topcoats to seal them.

  • Scratch Kote & overlay mixes
  • Stamp mix & texture coats
  • Mulasticoat deck coating
  • Acrylic sealers
  • Hydrothane & polyurea
See overlay systems
Surface prep equipment

Husqvarna

Planetary floor grinders, HEPA dust extractors and T-REX diamond tooling. Machines are quoted individually; tooling is on the shelf, and grinders are also available to rent.

  • Planetary floor grinders
  • HEPA dust extractors
  • T-REX diamond tooling
  • Grinder & package quotes
Grinders & tooling
Three ways to buy

How Contractors Order From Us

Walk in, call it in, or order online. However you buy, the material comes off the same Corona shelf.

01

Walk-In Pickup

Come to 284 Dupont Street in Corona on a weekday morning. Tell us the floor, the square footage and the slab condition and we will pull the right system, kit sizes and tooling.

02

Call Ahead

Call (909) 272-5137 with your list and we will stage the order for pickup. Ask about a contractor account for volume pricing and project quotes.

03

Order Online

Browse prices and sizes in the online store, check out, and pick up in Corona. Ask us about shipping on larger orders.

Why buy from a local supply house

Not a Big-Box Shelf, Not a Mystery Website

  • Product in hand todayNo freight wait and no ordering a week out. If it is on the page, it is on the shelf or a phone call from being pulled.
  • Advice from installersKit sizing, cure times, moisture questions, which topcoat for direct sun. Ask at the counter and get an answer you can use on the job tomorrow.
  • Professional-grade only100% solids epoxy, true polyaspartics and urethane cement. Nothing water-thinned, nothing packaged for the weekend aisle.
  • Training under the same roofBuy the material, then learn it in our 2-day hands-on class at the Corona shop.
  • Tech data on fileSpec sheets and SDS for what we stock are on the technical data page, and samples are available on request.

Who Picks Up Here

Epoxy and coating contractors from across Southern California, plus homeowners doing their own garage or patio. Our Corona location sits off the 91 and 15, a short drive from most of the Inland Empire and Orange County.

CoronaRiversideNorcoEastvaleOntarioChinoAnaheimOrange CountySan BernardinoTemeculaLos AngelesSan Diego

Looking for an installer instead of material? Request an estimate and we will connect you with a contractor who uses our systems.

Buy it here, learn it here

2-Day Epoxy & Concrete Coating Training

Hands-on classes at this same Corona shop: surface prep on Husqvarna grinders, mixing, flake, metallic pours and concrete coating overlays. $750 includes lunch both days, certification and an ECS shirt.

See Class Dates
Common questions

Epoxy Supply FAQs

Do you sell to homeowners or only to contractors?

Both. Contractors get account pricing and volume quotes, and homeowners can buy the same professional-grade material for a garage, patio or shop floor. Tell us what you are coating and we will size the kits.

What epoxy brands do you carry in Corona?

We are an authorized Kretus distributor and also stock Euclid Chemical, Multicoat and Husqvarna surface prep equipment and tooling, plus our own E-FLO P100 metallic floor coating.

Can I order online and pick up?

Yes. Prices and kit sizes are listed in the online store. Order online, then pick up at 284 Dupont Street, Suite B #155, Corona, CA 92879. Call ahead and we will have it staged.

Do you rent floor grinders?

Yes. Husqvarna planetary grinders and dust extractors are available to rent by the day from our Corona location, and we stock the diamond tooling to go with them. See the concrete rentals page for details.

Do you offer contractor pricing?

Yes. Professional accounts get volume pricing, project estimates and flexible ordering. Call (909) 272-5137 or ask at the counter to set one up.

Can you help me pick the right system?

That is most of what we do at the counter. Bring the square footage, where the floor is and what it has to stand up to, and we will recommend a primer, basecoat and topcoat from what is in stock, along with the prep tooling.

Need It Today?

Call with your list and we will have it staged at the Corona counter, or stop by on a weekday morning and talk through the job.

Empire Coating Solutions · 284 Dupont Street, Suite B #155, Corona, CA 92879